188 commits

Author	SHA1	Message	Date
Ranlvor	8e002e3b1a	add button for wled office auto on/off	2022-11-15 17:56:52 +01:00
Ranlvor	58c9ae1125	remove debugstatement accidently left in	2022-10-29 13:15:58 +02:00
Ranlvor	c2ed2fd37a	add option to disable auto-reclose on blinds	2022-10-29 13:15:01 +02:00
Ranlvor	eb7d1f7c5d	Addjust blind icon threshold to maximum window-open-save extention	2022-09-06 00:16:39 +02:00
Ranlvor	b6c7ba89cb	show office blinds position in icon	2022-09-05 21:40:51 +02:00
Ranlvor	14d72d626c	add office blinds	2022-08-20 12:50:05 +02:00
Ranlvor	d73ee95178	add fountain	2022-08-17 14:15:58 +02:00
Ranlvor	fa8d403076	two more boolean home-rust-settings	2022-04-22 13:14:22 +02:00
Ranlvor	38de936bdd	+soundbar	2022-04-21 21:06:49 +02:00
Ranlvor	060dfa61d8	add link to kodi webinterface	2022-01-28 23:34:50 +01:00
Ranlvor	ca2bef4248	office: +color_temp	2022-01-18 19:23:20 +01:00
Ranlvor	f2f5e3441b	add kittchen bulbs	2022-01-18 16:02:08 +01:00
Ranlvor	eab431f13b	show office led lwt ... because it takes a few seconds to respond to a brightness request when current state ist standby, but it immediatly leaves standby giving feedback that something is happening	2022-01-15 14:37:46 +01:00
Ranlvor	53911db686	+wled office	2022-01-13 21:43:18 +01:00
Ranlvor	51d410fbd3	Webinterface Bulb Office	2021-12-21 19:26:02 +01:00
Ranlvor	4d39149e77	bulb_office is now rgb, too	2021-12-21 16:10:33 +01:00
Ranlvor	5b62bc9325	add wled strip	2021-12-11 23:13:58 +01:00
Ranlvor	9e8765711a	show mic state on lamp color, too	2021-12-11 12:15:14 +01:00
Ranlvor	cbc3084eff	show mic/webcam status	2021-12-11 12:10:37 +01:00
Ranlvor	9b0c554e54	allow all temperature warning levels to be set individually	2021-12-11 12:00:17 +01:00
Ranlvor	4806973c0a	changes	2021-10-04 22:51:49 +02:00
Ranlvor	167d58d670	uwap-home: add printer	2021-05-20 20:49:54 +02:00
Ranlvor	b4b85fdb17	uwap-home: add toggle for projector auto off	2021-05-13 18:44:09 +02:00
Ranlvor	8c91dee9b8	uwap-home: add projector	2021-05-12 21:26:29 +02:00
Ranlvor	db62d59f67	uwap-home, NAS: revert to LWL based nas-online-check ... Because the network topology changed and now the nas is on an non-MQTT-switchport	2021-04-29 20:05:40 +02:00
Ranlvor	3208de65d4	Add snapcast and tvheadend webinterfaces	2021-04-29 20:04:31 +02:00
Ranlvor	bb334ca7bc	uwap-home: Add UI for new Livingroom/Diningroom-Heating-Controller	2021-03-20 13:07:52 +01:00
Ranlvor	fa07cdc784	Switch an die neue stelle gepackt	2021-03-20 12:59:44 +01:00
Ranlvor	9d44540ebc	uwap-home: move nas to new location and make it behave more like tucana for faster feedback	2021-02-20 17:04:22 +01:00
Ranlvor	e6b26dbac1	Add switch for office_heating/self_control ... This switch decides if the control algorithm for the office temperature runs inside of home-rust or in the heating valve itself. Former guarentees 100% open/close to avoid noise, later is way better (states like partial open, lower latency, lower temperature-shootovers and shootunders, etc, etc)	2021-01-14 20:36:16 +01:00
Ranlvor	27a9544092	uwap-home, heating: support temperature offsets	2020-12-23 13:08:56 +01:00
Ranlvor	6b78cc0a2f	uwap-home: Allow manual control of office heater	2020-12-23 10:08:33 +01:00
Ranlvor	6e63404724	bugfix for boostactiveendtime	2020-12-19 16:37:16 +01:00
Ranlvor	6028302a64	refactoring to give bedroom the new diningroom-controls	2020-12-19 16:33:33 +01:00
Ranlvor	a6aef2ee9a	uwap-home, heater diningroom: show boost/window open state	2020-12-19 16:19:42 +01:00
Ranlvor	01ed36e5be	uwap-home: Display current kitchen temperature ... Because we are subscribed to that topic anyway	2020-12-07 20:25:00 +01:00
Ranlvor	a25d7cc01d	uwap-home: Add kittchen temperature warning	2020-12-07 20:20:21 +01:00
Ranlvor	57655b0f66	uwap-home: nicer topic order	2020-12-07 20:03:01 +01:00
Ranlvor	b7b0bd7cac	uwap-home, lights livingroom: add new winter mode	2020-12-07 19:58:23 +01:00
Ranlvor	6c80eb2bd4	uwap-home: Add new light in the office	2020-12-07 19:57:52 +01:00
Ranlvor	9a070dcc2b	summeractive is now a JSON-Value instead of a dedicated topic	2020-11-16 10:04:37 +01:00
Ranlvor	424aef1991	Properly include Buffer to fix linter errors ... Thank you for the line, @uwap.	2020-11-15 03:58:38 +01:00
Ranlvor	e3eb924f1f	Formating for the linter	2020-11-15 03:30:51 +01:00
Ranlvor	9e388f4ae9	+Heating Bedroom	2020-11-15 03:27:03 +01:00
Ranlvor	dc2728b59a	uglify the code for the linter	2020-11-10 23:45:09 +01:00
Ranlvor	94aafdfbdd	Use the wrong type (String instead of Number) to make Flow happy	2020-11-10 23:34:09 +01:00
Ranlvor	ee4800d087	Add heater diningroom	2020-11-10 23:21:22 +01:00
Ranlvor	b898455f56	Pat the linter	2020-11-08 14:47:21 +01:00
Ranlvor	4e316f9e47	rework Lüftung/Heizung Büro	2020-11-08 14:42:17 +01:00
Ranlvor	fdb49f79a5	uwap-home: Add heating controls office	2020-11-06 19:36:51 +01:00